

Schneider Electric Contactor 25A 230V 50/60 - LC1DT25P7
£28.68 100 in stock. / VAT Excluded.
Schneider Electric Contactor 25A 230V 50/60 - LC1DT25P7
£28.68 100 in stock. / VAT Excluded.
LC1DT25P7 Schneider Contactor Electric
- Control circuit voltage: 230 to 240V AC 50/60Hz
- Rated breaking capacity: 250A at 440V for power circuit conforming to IEC 60947
- Product certifications: BV, CCC, CSA, DNV, GL, GOST, RINA, UL, LROS
- Utilisation category: AC-1
Product Description
From the TeSys LC1D series, a 4-pole (4 NO) category AC-1 contactor rated at 25A with a 230 to 240V AC coil.
Technical Specification
- Range: TeSys
- Product or component type: Contactor
- Device short name: LC1D
- Contactor application Resistive: load
- Utilisation category: AC-1
- Poles description: 4P
- Power pole contact composition: 4 NO
- [Ue] rated operational voltage:
- <= 300 V DC for power circuit
- <= 690 V AC 25...400 Hz for power circuit
- [Ie] rated operational current: 25 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit
- Control circuit type: AC 50/60 Hz
- [Uc] control circuit voltage: 230 V AC 50/60 Hz
- Auxiliary contact composition: 1 NO + 1 NC
- [Uimp] rated impulse withstand voltage: Conforming to IEC 60947
- Standards:
- CSA C22.2 No 14
- EN 60947-4-1
- EN 60947-5-1
- IEC 60947-4-1
- IEC 60947-5-1
- UL 508
- Mechanical durability: 15 M cycles
- Operating rate: 3600 cyc/h at <= 60 °C
Complementary
- Coil technology Without built-in suppressor module
- Minimum switching current: 5 mA for signalling circuit
- Minimum switching voltage: 17 V for signalling circuit
- Non-overlap time:
- 1.5 ms on de-energisation (between NC and NO contact)
- 1.5 ms on energisation (between NC and NO contact)
- Insulation resistance: > 10 MOhm for signalling circuit
- IP degree of protection: IP20 front face conforming to IEC 60529
- Protective treatment TH conforming to IEC: 60068-2-30
- Pollution degree: 3
- Height: 85 mm
- Width: 45 mm
- Depth: 92 mm
- Product weight: 0.365 kg